$35,000 + GST FOR THE PAIR. #7424D IMMACULATE UNIT Call Kevin for Info on 0274-980-476
Call Bill 027-496-3957 or Craig 027-496-3951 or email cavtruck@gmail.com for more info
6V53, 5SPX4 SPEED, 4.8M DROP SIDE TIPPER. #7421 DROP SIDE TIPPER Call Kevin for Info on 0274-980-476
250HP, 13SP, 5.8M DECK. #7420 TRANSPORTER Call Kevin for Info on 0274-980-476
6.1m x 1.3m sides, BFOB recerted, 4.2m drawbar with 50mm tow eye, REYCO susp, tare 4730kg.
Tare, 6420Kgs, GVM 32,000kgs, York axles, spring susp. Has forklift fixes to rear - as an extra. Call Greg for...
7.5m, with 20ft twist locks, 350hp, Cummins bigcam, has had pistons and liners approx 100,000km's ago, has done under 1mill...
CUMMINS NTC, 400hp, RT14615, ARTILLERY RIMS. 6 ROD SUSPENSION. REGO ON HOLD. TO BE SOLD "AS IS WHERE IS". ...
Rockgas, with only 1,400,000 kms approximately. 300hp, 10 speed Mack box, Western Trim. Current COF, Full maintenance records available. Rare...
RD8 ENGINE, RT 11615 GEARBOX. Ph.CAREY on 027-449-3444 or 0800-387-6878 for further details.
36seater, 60,000kms on recon motor, EK200 5sp box, very tidy.
5spd, 420,000kms, steel deck, fob hoist, steel lift out sides, swing tailgate. Call Greg for Info on 021-331-149
6 spd, 543,800kms Air Con, Good Tidy Bus.Tow Bar. Strong 6 Cylinder Engine. STK. V-24011. Call Dion on 0800-446-727 or...
Dry goods, 20' twist locks, steel floor and removable head boards, Spring susp, 5 spoke Artillery rims, tyres 255/70R 22.5s,...
Would suit owner operator, Deck width 2.3mtrs, length 5.9mtrs, GVM 9,200kg, Tare 3,980kg, wheelbase 4,800
400hp, 10 speed Mack box, recent pump and injectors rebuilt. Current COF, Full maintenance records available. Rare Collector Opportunity
8x4, 15 Speed Road Ranger, 300Hp, New Ply Deck, Steel Bulbar, Aftermarket Drivers Seat, Locker Boxes, Palfinger 16000 Rear mounted...
Spring susp, Wood floor over steel frame, 5 spoke Artllery rims, SS guards, 255/70R 22.5s, Front : 8.8mL, Rear :...
5,012 hours, goes well, a little rust in the cab
4x2, 5spd, 341,102kms, GVM 4500. Great little worker. STK #V-28041 Call Dion on 0800-446-727 or 06-872-1032 or 027-205-0730 to...
4x2, 5spd Manual, GVM 9200, 205,720kms. Ready for work with am 8.8 Cub bin. Stk v-22120. Call Dion on 0800-446-727...
4,770cc, 6SPD MANUAL NO CLUTCH, 5,660mm L DECK, COMPLETE WITH HARD WIRED REMOTE FOR DECK AND WINCH, REVERSING CAMERA, VERY...
400hp, 18SP, 44’s, FULL SLEEPER, D/BED, TV, FRIDGE.. #7417 SLEEPER CAB Call Kevin for Info on 0274-980-476
370 Motor, 18 Speed R/R, hub reduction diffs, logging gear
520,000 kms Approx, Tidy Machine. Call James Worsnop on 0275-722-642 or Dick Parker on 027-390-9677 to get more details.
8x4 with 6.4m tipper drop in 2 piece sides, 340hp 15sp R/R, very tidy.
DSC14 450 motor, GR880 g/box, cab parts
4JG2 engine parts. Handy short tipper deck. Call Mike, Paul, Daniel or Scott on 0800-446-727 or (06) 872-1040
6x4 steel fob b/tub tipper, s/t/gate, new reskinned deck, 13spd, 6 rod. Call Greg for Info on 021-331-149
Engine No.FD46, Chassis. LOCATED IN CHRISTCHURCH. Ph.Shane 027-639-6363 for further details.
Tidy condition, tare 6,040, GVM 27,000kgs, plastic liner, 828,000 kms, new cof 6/11/18
440HP, 7.3M DECK, 900 SIDES. #7426 TIDY TIPPER Call Kevin for Info on 0274-980-477
18 speed, most parts available.
Good engine had recent overhaul, most parts available
5spd, 322,503kms, GVM 5,400kgs, Tare 2,590kgs.. Call Greg for Info on 021-331-149
5spd, 357,383kms, GVM 5,995kgs, Tare 2,800kgs. Just out of the workshop. New CoF. Call Greg for Info on 021-331-149
Most parts available.
D12 420, SR1900 g/box.
tipper, all parts
C15, 90 ml Oscillating Turntable,150,000 GCM, Hydraulics. Call James Worsnop on 0275-722-642 or Dick Parker on 027-390-9677 to get more...
29tonne GVM, tare 10250kg, very tidy.
ENGINE : N14 @ 475HP, GEARBOX : PARTS ONLY, DIFFS : 52-153. Ph.CAREY on 027-449-3444 or 0800-387-6878 for further details.
4x2 transporter, 210hp, 6 speed manual, very tidy for age, great little low loader, extra long ramps with hydraulic controls.
Jap import version. 6H motor. Plenty of bits available. Call Mike, Paul, Daniel or Scott on 0800-446-727 or (06) 872-1040
Good V6 motor and box, HL7 diffs, hydraulics
Now dismantling, all parts available
6m x 1m sides, FOB hoist, 4.3m drawbar, 50mm eye, art rims, REYCO susp, tare 8420kg.
420hp, 13 speed, 543,069 miles, airbag suspension, with either 5m steel rock body, swinging tailgate, BFOB hoist, or 4.8m alloy...
Most Parts Available
With Carrier dual temp evaporators, air-flow floor, side rack bars, refrigerated under-floor lockers, on alloy SS tyres & air bags,...
N14 Cummins, 18 speed.
Just Arrived
Truck - C12 CAT, tare 7260kg, full hydraulics, air bag suspension, fixed turntable, Trailer - 3 axle 7.3m Barker trailer,...
s/tail gate, 13spd. Call Greg for Info on 021-331-149
4x2, Seats 3, Tare 3180kg, Payload 5720kg, GVM 8900kg, Deck 4390L x 2060W x 400H, low kms, very tidy for...
with full board hazard warning lights at rear. 5 spd, 473,900kms, deck 5m x 2.2m drop sides. Call Greg for...
NE6T ENGINE. Ph. Simon on 027 488 8719 or 0800-878-257 for further details.
Rated Capacity # 3000 kg, Machine Mass (Unladen) 2150 kg, Hours # 5412 or 6412 as per the hour clock...
18spd, 500hp, rebuilt 100k ago, Rubber block Susp, Alloy rims, Also Patchell 3 Axle Multi Log trailer. Call Greg for...
Spring susp, rear container doors, Steel floor, 5 spoke Artllery rims, 255/70R 22.5s, Internal Dims : 8.593mL, 2.49mW, 3.029mH. Call...
Fitted with box body + tail lifter, 465,000kms, GVM 11300kg.
380hp Nissan Engine, 6m Transfleet Alloy Tip Body, 22 cube Capacity, 1.5m Sides, Slippery Deck Spring Suspension, Drum Brakes, Eaton...
8.8M LONG, ON 19.5s, STEEL DECK. #7415T 8.8m Call Kevin for Info on 0274-980-476
Tare, 6720Kgs, GVM 39,000kgs, TRT axles. Call Greg for Info on 021-331-149
Tare, 6560Kgs, GVM 31,000kgs, Spicer axles, spring susp. Price includes new curtains. Call Greg for Info on 021-331-149
Spring susp, 5 spoke Artillery rims, tyres 255/70R 22.5s, D/Bar 1.91m, 50mm, 8.593mL x, 3.029mH x 2.49mW (Int), Tare,5840kgs, GVM22700kgs....
22.5” wheels, 21mm Plytech floor, Spicer axles, drum brakes. #50146 Ctc Craig (Upper NI) on 027-442-8041 or Tony (Lower NI)...
Ph.CAREY on 027-449-3444 or 0800-387-6878 for further details.
Ph.CAREY on 027-449-3444 or 0800-387-6878 for further details.
BPW axles, Air Suspension, Steel Deck.. #50168 $40,000 + GST. Ctc Craig (Upper NI) on 027-442-8041 or Tony (Lower NI)...
C12 motor parts, 18 spd R/R, Rockwells
9.1m internal (18 pallet), 19.5 BPW drum brakes, air suspension, alloy wheels, Steel floor, mezzanaine wall mounts. Ref : S746562....
4,663 hours, in excellent condition
450hp, 18spd, steel deck, 7.1m, 14 pallets, GVM 29,000kgs, Tare 10,840kgs, w/base 5,970m. 1,2m kms. Call Greg for Info...
Detroit powered all parts available day cab.
All Parts Available
Most Parts Available
12.75m L, Polished Alloy super single rims, Zepro 2tonne t/ lift, Front panel to king pin: 1250mm. Call Greg...
Call Jamie on 027-588-0039 or 09-430-2772 for more Info
Call Jamie on 027-588-0039 or 09-430-2772 for more Info
Engine No.4HG1, Chassis AKR71L. LOCATED IN CHRISTCHURCH. Ph.Shane 027-639-6363 for further details.
Well maintained truck with tidy 4.6m body, 1m sides, FOB hoist, not trailer coupling, tare 9860kg, good asphalt spreader.
FRONT: 7.4mL x 2.7mH REAR; 7,325mmL x 3.0mH. 8STUD BPW AXLES 19.5 ALLOYS, ON AIR BAG SUSPENSION, COMES WITH MESS FLOOR...
Self-steer 3 axle swing lift on air suspension completely refurbished including an overhauled engine – now ready for work and...
500HP, 18 SP, 6 ROD, HYDRAULICS #7294 TIDY TRACTOR Call Kevin for Info on 0274-980-476
Ph. Simon on 027 488 8719 or 0800-878-257 for further details.
Cummins ISX engine, other Argosy Cabs & Parts available
NZ New in excellent condition to be supplied with new curtains, 5,700 m body, Tare 4,240, GVM 9,000, Wheelbase 4,200,...
ISX Cummins (Recond 150k ago) 15spd RR (Recond), Hendrikson Air susp, 1.5kms, Tare 8,160kgs, GVM 24,500kgs. Call Greg for...
470 motor, 18 Spd Mack box, Rockwell’s, hydraulics
6x4, 410hp, 18 Speed, Alloy Bumper, Alloy Wheels, Alloy Tank, Air Kit, Centre console, Hydraulics can be supplied if required.
Most parts available
8x4, two in stock, most parts available.
Very tidy truck with good service history, 4.8m steel body, 800mm sides, FOB hoist, tidy cab, 50mm trailer coupling, 400hp,...
8X4 CAB CHASSIS, 580hp V8, 10spd, ON 6 ROD SUSPENSION, C T I, SCALES. TRUCK ONLY. Contact Jason...
420 hp, FULLY REBUILT GEARBOX. PRICE ON REQUEST. Ph.Simon 027 488 8719 for further details.
with hyd quick hitch, tilt bucket, rock bucket & thumb, tracks 60% good. 13,250hrs. Call Greg for Info on 021-331-149
430 motor, ZF box, DAF planertry diffs, good cab, wrecking 6 of these
Cummins, 18 spd R/R, Rockwell 46/160s, cab parts
Read the latest Equipment Guide Print Edition online
